Built-in BMS cabinet
125 kW (up to 261 kWh)
GOLD's integrated cabinet for commercial liquid cooling of energy storage systems is equipped with GOLD's second-generation battery management technology. It can be used in a variety of scenarios, including stand-alone configurations, integrated solar generation-storage-charging systems, and microgrids. When combined with GOLD's centralized management platform, the system enables energy monitoring and management, enabling functions such as tariff arbitrage, peak and valley smoothing, and demand response.
| Battery Type | LFP 314Ah |
| Nominal Voltage (DC) | 832V |
| DC Voltage Range | 650~949V |
| Nominal Power (DC) | 261.248kWh |
| Nominal Current | 157A |
| Nominal Power (AC) | 125kW |
| Rated Voltage (AC) | 380V |
| Power Factor | -0.99~+0.99 |
| Overload Capacity | 1.1 times the load - continuous operation, 1.2 times the load for 1 minute |
| Access Method | 3L+N+PE |
| Insulation Method | Non-insulated |
| Charge and Discharge Ratio | 0.5C |
| Weight | ≈2500 kg |
| Protection Level | IP54 |
| Cooling Method | Liquid Cooling |
| Number of Cycles | 6000 times / 80% DOD |
| Fire System | Aerosol + Gas/Smoke/Temperature Detectors + Water Fire Suppression |
| Operating Temperature | -20°C ~ +55°C |
| Dimensions (W × D × H) | 980 × 1330 × 2251.5 mm |
| Altitude above sea level | Below 2000 m (power reduction required above) |
| Communication interfaces | RS485, CAN, LAN, etc. |
| Transport mode | Lifting by forklift from below or crane from above |